ODROID-GO Advance (Black Edition) DIY Kit Supply

Description

ODROID-GO Advance (Black Edition) DIY Kit
The new revision has these new features:

• The name for the new revision is “ODROID-Go Advance Black Edition” or “OGA-BE” for short.
• The power input port has changed to a USB Type-C connector.
  
• A USB Type-C cable is included by default.
• An 802.11n SDIO WiFi module is included on the PCB.
  
• L2 and R2 shoulder buttons added.
• Shell case is available in 2 colors: Aura Black and Clear White.
  
• PCB is now black (earlier revision PCB was white).

OGA-BE Forum Post

Original product information (see above for new changes):

Following up to the wildly successful ODROID-GO portable retrogaming console comes the newest portable retrogaming offering from Hardkernel, the ODROID-GO Advance!

In contrast to the OG ODROID-GO which utilized an ESP32 microcontroller as the main processor, the ODROID-GO Advance utilizes a full RockChip RK3326 SoC!

THE EMULATOR SUPPORTS

• Game Boy
• Game Boy Color
• Game Gear
• Megadrive
• Nintendo Entertainment System
• Sega Master System
• …and more

SPECIFICATIONS

• Processor: CPU : RockChip RK3326 (Quad-Core ARM Cortex-A35 1.3GHz) GPU : Mali-G31 Dvalin
• Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
• Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
• Display: 3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
• Audio: Earphone Jack, 0.5Watt 8Ω Mono
• Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
• DC Jack: 2.5mm diameter DC plug USB Type-C charging/data plug.
• External I/O: USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
• WiFi: On-Board 802.11n SDIO
• Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left/Right Shoulder 2, Analog joystick
• Power consumption: Power consumption Game emulation: 250~500mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA

A     USB Type-A Power Cable
B     Top enclosure
C     Bottom enclosure
D     Plastic L/R trigger, X, Y, power Buttons
E     Plastic D-pad, A, B Buttons
F     ODROID-GO-Advance board
G     3000mAh battery
H     LCD window
I     I ~ VI button rubber
J     D-PAD rubber
K     A, B, X, Y button rubber
L     battery sticker
M     Analog joystick
N     320×480 TFT LCD
O     0.5W speaker
P     1.7×5 screws (7 pcs)
Q     1.7×8 screws (4 pcs)
R     Driver

NOTES

• 8GB or larger microSD card is required to store the emulator and game ROMs.
• If you have any problem with your ODROID-GO-Advance, switch off ODROID-GO-Advance by holding the on/off button for about 6 seconds.
  
• This is a DIY kit. You will need to assemble it yourself. Be careful handling the components, as some of them are fragile!

LINKS

• Assembly Guide – https://wiki.odroid.com/odroid_go_advance/go_adv_assembling

VIDEOS

Product Announcement by ETA Prime:

 Gameplay video from Hardkernel: